Online Catalog - C.N.C. – 5 axis/WaterJet/Laser Cutting/Engraving

Site Languages:

Credit Cards Accepted:

FEATURED PRODUCTS

MOTIONMASTER [SB51OX] - 60"X 120" 5-AXIS ROUTER...

MAKA [PE 70] - 6500 X 1200 X 550MM 5 AXIS CNC...

THERMWOOD [C67DT] - 5 AXIS TWIN TABLE CNC ROUTER...

THERMWOOD [DT (M-67)] - 10' X 10' 5-AXIS, 10 HP CNC ROUTER...

Price Range:

Age Range:

Condition:

Manufacturers:

Page 1 of 6

<< First Page | < Prev. Page | Next Page > | Last Page >>

ART [MICHELANGELO 2013] - 20' X 13' CNC LASER

Inventory #20531

Visit ART CNC Machining Centers

Capacity frame made from a combination of tubing and fabricated plates.
Table made from heavy-duty tubing.
Table is equipped with 1 mm thick grid system which support up to 900 LBS of work piece.
Optional support for heavier work piece is available.
Locating pins combination of 3 sides and 2 fronts.
Heavy duty locating pins controlled through program for squaring the piece on the table.
Axes description AXIS 1: X AXIS moves back and forth along the length of the machine.
AXIS 2: Y AXIS moves back and forth along the width of the machine.
AXIS 3: Z AXIS moves up and down along the height of the machine.
AXIS 4: Laser control is to adjust power of the laser beam.
General description of the machine.
A double sided supported gantry type CNC with the following specifications: available work area sizes: 4' x 4' to 20' x 13'.
Traverse speed:(Maximum point-point positioning speed) from X=30 m/min. to X=100 m/min.
From Y=30 m/min. to Y=100m/min.
From Z=10 m/min. to Z=60m/min.
Traverse speeds depends on the weight of the machine and the application for which the machine is used.
Axis 1 (x) description.
(included).
X is a linear axis along the length of the machine moving to back and forth of the work area.
This axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability.
X-Axis is mounted on four sets of four rows size (25) linear bearings and rail system.
Power and transmission on the X-Axis is provided by a powerful 1 kW digital.
Brushless AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
X-Axis is coupled to a high precision ground rack and pinion for ultimate accuracy and reliability.
Axis 2 (y) description.
(included).
Y is a linear axis along the width of the machine moving to left and the right of the work area.
Axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability.
Y-Axis is mounted on four sets of four rows size (25) linear bearings and rail system.
Power and transmission on the Y-Axis is provided by a powerful 1 kW digital.
Brush less AC servo motor and drive system.
With extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
Y-Axis is coupled to a high precision ground rack and pinion for ultimate accuracy and reliability.
Axis 3 (z) description.
(included).
Z is a vertical axis along the height of the machine up and down of the work area.
Axis is directly connected to a high precision preloaded ball screw and ball nut eliminating pulley and belt system hence adding higher accuracy and reliability.
Z-Axis is mounted on four sets of size (25) four rows linear bearing and rail system.
Power and transmission on the Z-Axis is provided by a powerful 700W digital.
Brush less AC servo motor and drive system.
With extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
Z-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability.
*Size of the servo motors and drive depends on the weight of the machine and the application for which the machine is used.
Axis 4 (laser control).
(included).
Laser control axis is a virtual axis.
Commanding proper power to the focusing head.
Electrical cabinet.
(included).
All of our electrical components are CSA and CUL approved.
Electrical systems on our machines are designed to work in extreme conditions and all are locally available for simple maintenance and lower overall cost of ownership.
Electrical enclosure is a true Nema 12 dust proofed cabinet with standard flip over keyboard and mouse platform.
Use high flex shielded cables for all connections.
Cables are carried by all enclosed cable tracks to protect them from chips and external elements.
Whole electrical system is approved by Ontario hydro and carries approval sticker.
Control system (included) powerful.
PC based CNC controller with Windowsc XP operating system and 3 interpolated.
2 linear positioning axes.
DXF converter generating machine codes automatically.
G_Code import capability.
Controller is running separately on a real time operating system while allowing the operator to work in a familiar Windowsc environment.
User friendly interface allowing the operator to navigate through menus and options allowing them to edit or create programs right on the machine terminal eliminating the need for additional person for programming.
MDI menu for manual operations.
Standard remote diagnostic allowing us to troubleshoot the machine from a remote location saving traveling time.
Automatic spindle warm-up cycle.
Optional macro program to allow for specific operations to be predefined and called up with the push of a button rather than being written each time in programming process.
(not included).
Optional CAD/CAM program (Not included).
Handheld pendant (included) equipped with the following functions jog function on X/Y and Z axis enables the operator to jog the machine in forward and reverse mode.
Start and stop cycle buttons enables the operator to start or stop a program while he or she is closer to actual work piece.
Pause mode stops all motions and resume button continues existing motions enabling the operator to inspect validity of operation or a new program.
Federate override controls the overall speed of the machine from 0 to maximum traverse speed on all axes.
The pendant also supports incremental jogging for fine-tuning adjustment for all axes.
Safety barrier (optional).
Safety barrier installed at the front of the machine activated when crossed and pauses all existing motions and resets by resume button.
Option is an excellent safety feature to protect the operator from accidental contact with moving axes.
Other specification available power can be configured for different industrial Voltages.
Air requirements 7 bars or 100 psi.
Warranty advance Robotic Technology free of charge covers warranty service for 12 months after delivery.
Customer would be charged for any warranty service call if the breakdown was caused by misuse or negligence.
Please note that our liability is limited to defects of the items supplied by us.
Under no circumstances shall we be liable for consequential or indirect damages such as but not limited to loss of production, profit losses etc,.
Price includes the above without extra options with a 20' X 13' table including a 100 watt laser unit.
Laser power generators are available from 100 to 400 Watts and can be priced for each individual application.
Different sizes of machine tables are available upon request and will be priced accordingly.
Note pricing and options are for standard...

View Specifications >

		Learn about Machines of Interest to Me >

ART [RENOIR 48 HD] - WATERJET CNC MACHINE 4' X 8' C/W MOVING TABLE

Inventory #20475

Visit ART CNC Machining Centers

Capacity frame made from a combination of tubing and fabricated plates.
Tubes have minimum of 9 mm wall thickness, stress relieved and sand blasted for final finishing.
Table made from heavy duty tubing and sheet metal with 36" deep water reservoir and equipped with 1.5 mm thick grid system which support up to 1200 LBS of work piece, optional support for heavier work piece is available.
Locating pins: combination of 3 sides and 2 fronts.
Heavy duty locating pins controlled through program for squaring the piece on the table.
Axis description AXIS 1: X AXIS moves back and forth along the length of the machine.
AXIS 2: Y AXIS moves back and forth along the width of the machine.
AXIS 3: Z AXIS moves up and down along the height of the machine.
AXIS 4: Abrasive control is to adjust the volume of the abrasive supply.
General description of the machine a double sided supported gantry type CNC with the following specifications: available work area sizes: 4' x 8'.
Traverse speed: (Maximum point-point positioning speed) X=40 m/min./Y=40 m/min./Z=20 m/min.
Axis 1 (x) description (included), X is a linear axis along the length of the machine moving to back and forth of the work area.
This axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability.
X-Axis is mounted on four sets of four rows size (30) linear bearings and rail system.
Power and transmission on the X-Axis is provided by a powerful 1.5 kW digital.
Brushless AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
X-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability.
Axis 2 (y) description (included) Y is a linear axis along the width of the machine moving to left and the right of the work area.
This axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability.
Y-Axis is mounted on four sets of four rows size (30) linear bearings and rail system.
Power and transmission on the Y-Axis is provided by a powerful 1.5 kW digital.
Brush less AC servo motor and drive system.
With extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
Y-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability.
Axis 3 (z) description (included) Z is a vertical axis along the height of the machine up and down of the work area.
This axis is directly connected to a high precision preloaded ball screw and ball nut eliminating pulley and belt system hence adding higher accuracy and reliability.
Z-Axis is mounted on four sets of size (25) four rows linear bearing and rail system.
Power and transmission on the Z-Axis is provided by a powerful 900W digital.
Brushless AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability.
Axis 4 (abrasive control) (included) spindle speed axis is a virtual axis.
Commanding proper volume on abrasive to the cutting head.
Electrical cabinet (included) all of our electrical components are CSA and CUL approved.
The electrical systems on our machines are designed to work in extreme conditions and all are locally available for simple maintenance and lower overall cost of ownership.
Our electrical enclosure is a true Nema 12 dust proofed cabinet with standard flip over keyboard and mouse platform.
Use high flex shielded cables for all connections, cables are carried by all enclosed cable tracks to protect them from chips and external elements.
Electrical system is approved by Ontario hydro and carries approval sticker.
Control system (included), powerful PC based CNC controller with Windows XP operating system and 3 interpolated.
2 linear positioning axes.
DXF converter generating machine codes automatically.
G_Code import capability.
Controller is running separately on a real time operating system while allowing the operator to work in a familiar Windows environment.
User friendly interface allowing the operator to navigate through menus and options allowing them to edit or create programs right on the machine terminal eliminating the need for additional person for programming.
MDI menu for manual operations.
Standard remote diagnostic allowing us to troubleshoot the machine from a remote location saving traveling time.
Automatic spindle warm-up cycle.
Optional macro program to allow for specific operations to be predefined and called up with the push of a button rather than being written each time in programming process (Not included).
Optional cad/cam program (not included).
Handheld pendant (included) is equipped with the following functions: Jog function on X/Y/Z axis enables the operator to jog the machine in forward and reverse mode.
Start and stop cycle buttons enables the operator to start or stop a program while he or she is closer to actual work piece.
Pause mode stops all motions and resume button continues existing motions enabling the operator to inspect validity of operation or a new program.
Federate override controls the overall speed of the machine from 0 to maximum traverse speed on all axes.
Pendant also supports incremental jogging for fine tuning adjustment for all axes.
Safety barrier (optional) installed at the front of the machine activated when crossed and pauses all existing motions and resets by resume button, this option is an excellent safety feature to protect the operator from accidental contact with moving axes.
Other specification power requirements: 600V 3 Phases at 55 Amps.
Air requirements: 7 bars or 100 psi. warranty Advance Robotic Technology free of charge covers warranty service for 12 months after delivery.
Customer would be charged for any warranty service call if the breakdown were caused by misuse or negligence.
Please note that our liability is limited to defects of the items supplied by us.
Under no circumstances shall we be liable for consequential or indirect damages such as but not limited to loss of production.
Profit losses.
Etc price of the CNC machine 4' x 8' Net: CAD$82,000.00.
5' x 10' Net: CAD$98,000.00.
5' x 12' Net: CAD$116,000.00.
Price is only for the CNC machine and does not include the price of the high pressure intensifier pumps .
Abrasive delivery system.
Cutting head and high pressure tubings.
PART B: HP Intensifier Type HP19/37-S.
Operating pressure : 400 - 3,800 bar.
Design pressure : 4,000 bar.
Volume flow : 0 - 3.8 l/min. or 1 GPM.
Plunger diameter : 19 mm.
Stroke length : 240 mm.
No. of strokes : max. 33 1/min.
Hydraulic pressure : max. 260 bar.
Main motor...

View Specifications >

		Learn about Machines of Interest to Me >

ART [MICHELANGELO 44] - 4' X 4' CNC LASER

Inventory #20476

Visit ART CNC Machining Centers

Capacity frame made from a combination of tubing and fabricated plates.
Table made from heavy-duty tubing.
Table is equipped with 1 mm thick grid system which support up to 900 LBS of work piece.
Optional support for heavier work piece is available.
Locating pins combination of 3 sides and 2 fronts.
Heavy duty locating pins controlled through program for squaring the piece on the table.
Axes description AXIS 1: X AXIS moves back and forth along the length of the machine.
AXIS 2: Y AXIS moves back and forth along the width of the machine.
AXIS 3: Z AXIS moves up and down along the height of the machine.
AXIS 4: Laser control is to adjust power of the laser beam.
General description of the machine.
A double sided supported gantry type CNC with the following specifications: available work area sizes: 4' x 4' to 20' x 13'.
Traverse speed:(Maximum point-point positioning speed) from X=30 m/min. to X=100 m/min.
From Y=30 m/min. to Y=100m/min.
From Z=10 m/min. to Z=60m/min.
Traverse speeds depends on the weight of the machine and the application for which the machine is used.
Axis 1 (x) description (included).
X is a linear axis along the length of the machine moving to back and forth of the work area.
This axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability.
X-Axis is mounted on four sets of four rows size (25) linear bearings and rail system.
Power and transmission on the X-Axis is provided by a powerful 1 kW digital.
Brush less AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
X-Axis is coupled to a high precision ground rack and pinion for ultimate accuracy and reliability.
Axis 2 (y) description.
(included).
Y is a linear axis along the width of the machine moving to left and the right of the work area.
Axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability.
Y-Axis is mounted on four sets of four rows size (25) linear bearings and rail system.
Power and transmission on the Y-Axis is provided by a powerful 1 kW digital.
Brush less AC servo motor and drive system.
With extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
Y-Axis is coupled to a high precision ground rack and pinion for ultimate accuracy and reliability.
Axis 3 (z) description.
(included).
Z is a vertical axis along the height of the machine up and down of the work area.
Axis is directly connected to a high precision preloaded ball screw and ball nut eliminating pulley and belt system hence adding higher accuracy and reliability.
Z-Axis is mounted on four sets of size (25) four rows linear bearing and rail system.
Power and transmission on the Z-Axis is provided by a powerful 700W digital.
Brush less AC servo motor and drive system.
With extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
Z-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability.
*Size of the servo motors and drive depends on the weight of the machine and the application for which the machine is used.
Axis 4 (laser control).
(included).
Laser control axis is a virtual axis.
Commanding proper power to the focusing head.
Electrical cabinet.
(included).
All of our electrical components are CSA and CUL approved.
Electrical systems on our machines are designed to work in extreme conditions and all are locally available for simple maintenance and lower overall cost of ownership.
Electrical enclosure is a true Nema 12 dust proofed cabinet with standard flip over keyboard and mouse platform.
Use high flex shielded cables for all connections.
Cables are carried by all enclosed cable tracks to protect them from chips and external elements.
Whole electrical system is approved by Ontario hydro and carries approval sticker.
Control system (included) powerful.
PC based CNC controller with Windowsc XP operating system and 3 interpolated.
2 linear positioning axes.
DXF converter generating machine codes automatically.
G_Code import capability.
Controller is running separately on a real time operating system while allowing the operator to work in a familiar Windowsc environment.
User friendly interface allowing the operator to navigate through menus and options allowing them to edit or create programs right on the machine terminal eliminating the need for additional person for programming.
MDI menu for manual operations.
Standard remote diagnostic allowing us to troubleshoot the machine from a remote location saving traveling time.
Automatic spindle warm-up cycle.
Optional macro program to allow for specific operations to be predefined and called up with the push of a button rather than being written each time in programming process.
(not included).
Optional CAD/CAM program (Not included).
Handheld pendant (included) equipped with the following functions jog function on X/Y and Z axis enables the operator to jog the machine in forward and reverse mode.
Start and stop cycle buttons enables the operator to start or stop a program while he or she is closer to actual work piece.
Pause mode stops all motions and resume button continues existing motions enabling the operator to inspect validity of operation or a new program.
Federate override controls the overall speed of the machine from 0 to maximum traverse speed on all axes.
The pendant also supports incremental jogging for fine-tuning adjustment for all axes.
Safety barrier (optional).
Safety barrier installed at the front of the machine activated when crossed and pauses all existing motions and resets by resume button.
Option is an excellent safety feature to protect the operator from accidental contact with moving axes.
Other specification available power can be configured for different industrial Voltages.
Air requirements 7 bars or 100 psi.
Warranty advance Robotic Technology free of charge covers warranty service for 12 months after delivery.
Customer would be charged for any warranty service call if the breakdown was caused by misuse or negligence.
Please note that our liability is limited to defects of the items supplied by us.
Under no circumstances shall we be liable for consequential or indirect damages such as but not limited to loss of production.
Profit losses.
Etc,.
Price includes the above without extra options with a 4' X 4' table including a 100 watt laser unit.
Laser power generators are available from 100 to 400 Watts and can be priced for each individual application.
Different sizes of machine tables are available upon request and will be priced accordingly.
Please specify what Voltages are...

View Specifications >

		Learn about Machines of Interest to Me >

ART [MICHELANGELO 48] - 4' X 8' CNC LASER

Inventory #20586

Visit ART CNC Machining Centers

Capacity frame made from a combination of tubing and fabricated plates.
Table made from heavy-duty tubing and equipped with 1 mm thick grid system which support up to 900 LBS of work piece.
Optional support for heavier work piece is available.
Locating pins combination of 3 sides and 2 fronts.
Heavy duty locating pins controlled through program for squaring the piece on the table.
Axes description AXIS 1: X AXIS moves back and forth along the length of the machine.
AXIS 2: Y AXIS moves back and forth along the width of the machine.
AXIS 3: Z AXIS.
Moves up and down along the height of the machine.
AXIS 4: Laser control is to adjust power of the laser beam.
General description of the machine.
A double sided supported gantry type CNC with the following specifications: available work area sizes: 4' x 8' to 20' x 13'.
Traverse speed:(Maximum point-point positioning speed) from X=30 m/min. to X=100 m/min.
From Y=30 m/min. to Y=100m/min.
From Z=10 m/min. to Z=60m/min.
Traverse speeds depends on the weight of the machine and the application for which the machine is used.
Axis 1 (x) description (included).
X is a linear axis along the length of the machine moving to back and forth of the work area.
This axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability.
X-Axis is mounted on four sets of four rows size (25) linear bearings and rail system.
Power and transmission on the X-Axis is provided by a powerful 1 kW digital.
Brushless AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
X-Axis is coupled to a high precision ground rack and pinion for ultimate accuracy and reliability.
Axis 2 (y) description (included).
Y is a linear axis along the width of the machine moving to left and the right of the work area.
Axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability.
Y-Axis is mounted on four sets of four rows size (25) linear bearings and rail system.
Power and transmission on the Y-Axis is provided by a powerful 1 kW digital.
Brushless AC servo motor and drive system.
With extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
Y-Axis is coupled to a high precision ground rack and pinion for ultimate accuracy and reliability.
Axis 3 (z) description (included), Z is a vertical axis along the height of the machine up and down of the work area.
Axis is directly connected to a high precision preloaded ball screw and ball nut eliminating pulley and belt system hence adding higher accuracy and reliability.
Z-Axis is mounted on four sets of size (25) four rows linear bearing and rail system.
Power and transmission on the Z-Axis is provided by a powerful 700W digital.
Brush less AC servo motor and drive system.
With extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
Z-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability.
Size of the servo motors and drive depends on the weight of the machine and the application for which the machine is used.
Axis 4 (laser control) (included).
Laser control axis is a virtual axis.
Commanding proper power to the focusing head.
Electrical cabinet (included).
All of our electrical components are CSA and CUL approved.
Electrical systems on our machines are designed to work in extreme conditions and all are locally available for simple maintenance and lower overall cost of ownership.
Electrical enclosure is a true Nema 12 dust proofed cabinet with standard flip over keyboard and mouse platform.
Use high flex shielded cables for all connections.
Cables are carried by all enclosed cable tracks to protect them from chips and external elements.
Whole electrical system is approved by Ontario hydro and carries approval sticker.
Control system (included) powerful.
PC based CNC controller with Windows XP operating system and 3 interpolated.
2 linear positioning axes.
DXF converter generating machine codes automatically.
G_Code import capability.
Controller is running separately on a real time operating system while allowing the operator to work in a familiar Windows environment.
User friendly interface allowing the operator to navigate through menus and options allowing them to edit or create programs right on the machine terminal eliminating the need for additional person for programming.
MDI menu for manual operations.
Standard remote diagnostic allowing us to troubleshoot the machine from a remote location saving traveling time.
Automatic spindle warm-up cycle.
Optional macro program to allow for specific operations to be predefined and called up with the push of a button rather than being written each time in programming process (not included).
Optional CAD/CAM program (Not included).
Handheld pendant (included) equipped with the following functions jog function on X/Y and Z axis enables the operator to jog the machine in forward and reverse mode.
Start and stop cycle buttons enables the operator to start or stop a program while he or she is closer to actual work piece.
Pause mode stops all motions and resume button continues existing motions enabling the operator to inspect validity of operation or a new program.
Federate override controls the overall speed of the machine from 0 to maximum traverse speed on all axes.
The pendant also supports incremental jogging for fine-tuning adjustment for all axes.
Safety barrier (optional) installed at the front of the machine activated when crossed and pauses all existing motions and resets by resume button.
Option is an excellent safety feature to protect the operator from accidental contact with moving axes.
Other specification available power can be configured for different industrial Voltages.
Air requirements 7 bars or 100 psi.
Warranty advance Robotic Technology free of charge covers warranty service for 12 months after delivery.
Customer would be charged for any warranty service call if the breakdown was caused by misuse or negligence.
Please note that our liability is limited to defects of the items supplied by us.
Under no circumstances shall we be liable for consequential or indirect damages such as but not limited to loss of production, profit losses etc,.
Price includes the above without extra options with a 4' X 8' table including a 100 watt laser unit.
Laser power generators are available from 100 to 400 Watts and can be priced for each individual application.
Different sizes of machine tables are available upon request and will be priced accordingly.
Please specify what Voltages are required at time of order Note pricing and options are for standard basic...

View Specifications >

		Learn about Machines of Interest to Me >

ART [MICHELANGELO 510] - 5' X 10' CNC LASER

Inventory #20587

Visit ART CNC Machining Centers

Capacity frame made from a combination of tubing and fabricated plates.
Table made from heavy-duty tubing and equipped with 1 mm thick grid system which support up to 900 LBS of work piece, optional support for heavier work piece is available.
Locating pins combination of 3 sides and 2 fronts.
Heavy duty locating pins controlled through program for squaring the piece on the table.
Axes description AXIS 1: X AXIS moves back and forth along the length of the machine.
AXIS 2: Y AXIS moves back and forth along the width of the machine.
AXIS 3: Z AXIS moves up and down along the height of the machine.
AXIS 4: Laser control is to adjust power of the laser beam.
General description of the machine.
A double sided supported gantry type CNC with the following specifications: available work area sizes: 5' x 10' to 20' x 13'.
Traverse speed:(Maximum point-point positioning speed) from X=30 m/min. to X=100 m/min., from Y=30 m/min. to Y=100m/min., from Z=10 m/min. to Z=60m/min.
Traverse speeds depends on the weight of the machine and the application for which the machine is used.
Axis 1 (x) description (included).
X is a linear axis along the length of the machine moving to back and forth of the work area.
This axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability.
X-Axis is mounted on four sets of four rows size (25) linear bearings and rail system.
Power and transmission on the X-Axis is provided by a powerful 1 kW digital.
Brushless AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
X-Axis is coupled to a high precision ground rack and pinion for ultimate accuracy and reliability.
Axis 2 (y) description (included).
Y is a linear axis along the width of the machine moving to left and the right of the work area.
Axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability.
Y-Axis is mounted on four sets of four rows size (25) linear bearings and rail system.
Power and transmission on the Y-Axis is provided by a powerful 1 kW digital.
Brushless AC servo motor and drive system.
With extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
Y-Axis is coupled to a high precision ground rack and pinion for ultimate accuracy and reliability.
Axis 3 (z) description (included).
Z is a vertical axis along the height of the machine up and down of the work area.
Axis is directly connected to a high precision preloaded ball screw and ball nut eliminating pulley and belt system hence adding higher accuracy and reliability.
Z-Axis is mounted on four sets of size (25) four rows linear bearing and rail system.
Power and transmission on the Z-Axis is provided by a powerful 700W digital.
Brushless AC servo motor and drive system, with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
Z-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability.
Size of the servo motors and drive depends on the weight of the machine and the application for which the machine is used.
Axis 4 (laser control) (included), laser control axis is a virtual axis.
Commanding proper power to the focusing head.
Electrical cabinet (included).
All of our electrical components are CSA and CUL approved.
Electrical systems on our machines are designed to work in extreme conditions and all are locally available for simple maintenance and lower overall cost of ownership.
Electrical enclosure is a true Nema 12 dust proofed cabinet with standard flip over keyboard and mouse platform.
Use high flex shielded cables for all connections.
Cables are carried by all enclosed cable tracks to protect them from chips and external elements.
Whole electrical system is approved by Ontario hydro and carries approval sticker.
Control system (included) powerful.
PC based CNC controller with Windows XP operating system and 3 interpolated.
2 linear positioning axes.
DXF converter generating machine codes automatically.
G-Code import capability.
Controller is running separately on a real time operating system while allowing the operator to work in a familiar Windowsc environment.
User friendly interface allowing the operator to navigate through menus and options allowing them to edit or create programs right on the machine terminal eliminating the need for additional person for programming.
MDI menu for manual operations.
Standard remote diagnostic allowing us to troubleshoot the machine from a remote location saving traveling time.
Automatic spindle warm-up cycle.
Optional macro program to allow for specific operations to be predefined and called up with the push of a button rather than being written each time in programming process (not included).
Optional CAD/CAM program (Not included).
Handheld pendant (included) equipped with the following functions jog function on X/Y and Z axis enables the operator to jog the machine in forward and reverse mode.
Start and stop cycle buttons enables the operator to start or stop a program while he or she is closer to actual work piece.
Pause mode stops all motions and resume button continues existing motions enabling the operator to inspect validity of operation or a new program.
Federate override controls the overall speed of the machine from 0 to maximum traverse speed on all axes.
The pendant also supports incremental jogging for fine-tuning adjustment for all axes.
Safety barrier (optional) installed at the front of the machine activated when crossed and pauses all existing motions and resets by resume button.
Option is an excellent safety feature to protect the operator from accidental contact with moving axes.
Other specification available power can be configured for different industrial Voltages.
Air requirements 7 bars or 100 psi.
Warranty advance Robotic Technology free of charge covers warranty service for 12 months after delivery.
Customer would be charged for any warranty service call if the breakdown was caused by misuse or negligence.
Please note that our liability is limited to defects of the items supplied by us.
Under no circumstances shall we be liable for consequential or indirect damages such as but not limited to loss of production, profit losses etc,.
Price includes the above without extra options with a 5' X 10' table including a 100 watt laser unit.
Laser power generators are available from 100 to 400 Watts and can be priced for each individual application.
Different sizes of machine tables are available upon request and will be priced accordingly.
Please specify what Voltages are required at time of order Note pricing and options are for standard basic machines, please...

View Specifications >

		Learn about Machines of Interest to Me >

ART [MICHELANGELO 512] - 5' X 12' CNC LASER

Inventory #20588

Visit ART CNC Machining Centers

Capacity frame made from a combination of tubing and fabricated plates.
Table made from heavy-duty tubing and equipped with 1 mm thick grid system which support up to 900 LBS of work piece.
Optional support for heavier work piece is available.
Locating pins combination of 3 sides and 2 fronts.
Heavy duty locating pins controlled through program for squaring the piece on the table.
Axes description AXIS 1: X AXIS moves back and forth along the length of the machine.
AXIS 2: Y AXIS moves back and forth along the width of the machine.
AXIS 3: Z AXIS moves up and down along the height of the machine.
AXIS 4: Laser control is to adjust power of the laser beam.
General description of the machine.
A double sided supported gantry type CNC with the following specifications: available work area sizes: 5' x 12' to 20' x 13'.
Traverse speed:(Maximum point-point positioning speed) from X=30 m/min. to X=100 m/min., from Y=30 m/min. to Y=100m/min., from Z=10 m/min. to Z=60m/min., traverse speeds depends on the weight of the machine and the application for which the machine is used.
Axis 1 (x) description (included).
X is a linear axis along the length of the machine moving to back and forth of the work area.
This axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability.
X-Axis is mounted on four sets of four rows size (25) linear bearings and rail system.
Power and transmission on the X-Axis is provided by a powerful 1 kW digital.
Brushless AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
X-Axis is coupled to a high precision ground rack and pinion for ultimate accuracy and reliability.
Axis 2 (y) description (included).
Y is a linear axis along the width of the machine moving to left and the right of the work area.
Axis is directly connected to a high precision planetary gearbox hence adding higher accuracy and reliability.
Y-Axis is mounted on four sets of four rows size (25) linear bearings and rail system.
Power and transmission on the Y-Axis is provided by a powerful 1 kW digital.
Brushless AC servo motor and drive system with extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
Y-Axis is coupled to a high precision ground rack and pinion for ultimate accuracy and reliability.
Axis 3 (z) description (included).
Z is a vertical axis along the height of the machine up and down of the work area.
Axis is directly connected to a high precision preloaded ball screw and ball nut eliminating pulley and belt system hence adding higher accuracy and reliability.
Z-Axis is mounted on four sets of size (25) four rows linear bearing and rail system.
Power and transmission on the Z-Axis is provided by a powerful 700W digital.
Brush less AC servo motor and drive system.
With extremely accurate 17 bit encoder feed back (131000 pulses/Revolution).
Z-Axis is coupled to a high precision ball screw and ball nut for ultimate accuracy and reliability.
Size of the servo motors and drive depends on the weight of the machine and the application for which the machine is used.
Axis 4 (laser control) (included).
Laser control axis is a virtual axis.
Commanding proper power to the focusing head.
Electrical cabinet (included).
All of our electrical components are CSA and CUL approved.
Electrical systems on our machines are designed to work in extreme conditions and all are locally available for simple maintenance and lower overall cost of ownership.
Electrical enclosure is a true Nema 12 dust proofed cabinet with standard flip over keyboard and mouse platform.
Use high flex shielded cables for all connections.
Cables are carried by all enclosed cable tracks to protect them from chips and external elements.
Whole electrical system is approved by Ontario hydro and carries approval sticker.
Control system (included) powerful.
PC based CNC controller with Windowsc XP operating system and 3 interpolated.
2 linear positioning axes.
DXF converter generating machine codes automatically.
G-Code import capability.
Controller is running separately on a real time operating system while allowing the operator to work in a familiar Windowsc environment.
User friendly interface allowing the operator to navigate through menus and options allowing them to edit or create programs right on the machine terminal eliminating the need for additional person for programming.
MDI menu for manual operations, standard remote diagnostic allowing us to troubleshoot the machine from a remote location saving traveling time.
Automatic spindle warm-up cycle.
Optional macro program to allow for specific operations to be predefined and called up with the push of a button rather than being written each time in programming process (not included).
Optional CAD/CAM program (Not included).
Handheld pendant (included) equipped with the following functions jog function on X/Y and Z axis enables the operator to jog the machine in forward and reverse mode.
Start and stop cycle buttons enables the operator to start or stop a program while he or she is closer to actual work piece.
Pause mode stops all motions and resume button continues existing motions enabling the operator to inspect validity of operation or a new program.
Federate override controls the overall speed of the machine from 0 to maximum traverse speed on all axes.
The pendant also supports incremental jogging for fine-tuning adjustment for all axes.
Safety barrier (optional).
Safety barrier installed at the front of the machine activated when crossed and pauses all existing motions and resets by resume button.
Option is an excellent safety feature to protect the operator from accidental contact with moving axes.
Other specification available power can be configured for different industrial Voltages.
Air requirements 7 bars or 100 psi.
Warranty advance Robotic Technology free of charge covers warranty service for 12 months after delivery.
Customer would be charged for any warranty service call if the breakdown was caused by misuse or negligence.
Please note that our liability is limited to defects of the items supplied by us.
Under no circumstances shall we be liable for consequential or indirect damages such as but not limited to loss of production, profit losses etc,.
Price includes the above without extra options with a 5' X 12' table including a 100 watt laser unit.
Laser power generators are available from 100 to 400 Watts and can be priced for each individual application.
Different sizes of machine tables are available upon request and will be priced accordingly.
Please specify what Voltages are required at time of order Note pricing and options are for standard...

View Specifications >

		Learn about Machines of Interest to Me >

ART [MONET 3510] - 61" X 121" 2 HEAD 5 AXIS MOVING TABLE CARVING CNC MACHINE

Inventory #21685

Visit ART CNC Machining Centers

Capacity work area X=61" Y=121" Z=20".
Traverse speed X=60 m/min.
Y=60 m/min.
Z=30 m/min.
Axis 1, X AXIS moves back and forth along the length of the machine.
Axis 2, Y AXIS moves left and right along the width of the machine.
Axis 3, Z AXIS moves up and down along the height of the machine.
Axis 4, Spindle Axis 1 is to adjust the speed of spindle, can turn from 3000-24000 RPM and this speed is selectable through the program.
Axis 5, Spindle Axis 2 is to adjust the speed of spindle, can turn from 3000-24000 RPM and this speed is selectable through the program.
Two spindles with 7.5 kW (10 HP) power 400V providing necessary power to the cutting heads, spindles are ER32 series with tightening nuts and collets.
Both spindles have independent drives and slide on independent pneumatic units.
Spindles are mounted on 1.5" T6061 aluminum plate and adjusted through two screw mechanism for distance of 4" - 20" center-center.
Powerful PC based CNC controller with Windows XP operating system and 3 interpolated, 2 linear and positioning axes.
DXF converter generating machine codes automatically.
Controller is capable to work on 3 surfaces of front, back and the top.
G_code import capability.
Controller is running separately on a real time operating system while allowing the operator to work in a familiar Windows environment.
Tool database allows for information of up to 50 tools to be stored and called through the program.
Automatic spindle warm up cycle.
Optional CAD/CAM program (Not included).
Air requirements 7 bars of 100 PSI.
Price includes final test at customer presence, two days training...

View Specifications >

		Learn about Machines of Interest to Me >

ANDERSON [PTP-1360IP] - 5 AXIS CNC ROUTER

Inventory #28024

SOLD

Capacity table size 1300 x 6000 mm table.
Moving bridge (stationary table).
15 HP HSK63F router head.
20 position automatic tool changer.
(8) pod and rail system.
(2) pneumatic pop up pins located at each end of X axis.
1 pop up pneumatic pin for each pod and rail system.
4 lifting plates to align the workpiece against pop up pin.
2 controls for vacuum clamping.
1 vacuum pump 250 CBM and 25.5" Hg.
2 independent vacuum zones.
Siemans AC digital servo motors on X, Y and Z axis.
Automatic oil lubrication.
2 suction pods for each pod and rail system.
Working stroke X= 5930 mm driven by rack and pinion, Y= 1730 mm driven by ballscrew, Z= 450 mm driven by ballscrew.
A axis +/_ 180 Degrees.
C axis +/- 270°s.
Rapid travel X= 55 M/min., Y= 60 M/min., Z= 25 M/min., B and C axis 170'/sec.
Rotation speed from 10,000 to 24,000 RPM.
2 HP multi spindle boring unit with 16 independently and selectable spindles for vertical boring and 2 spindles for horizontal boring.
Siemens CNC System 840D, fast corner function.
Voltage 208v,,220v, 240v, 460v, 480v, 575v, or 600v.
Approximate 86 Amp at 220 Volt,compressed air requirement 100 PSI- 3/4"connection...

View Specifications >

		Learn about Machines of Interest to Me >

Page 1 of 6

<< First Page | < Prev. Page | Next Page > | Last Page >>

* Price may vary with exchange rate.