MLS MACHINERY New and Used Woodworking Saws - Cut Off , Optimizing and Defecting - Bell, Boss, Industrial, Barr-Mullin, CTD, Evans, Evans Machinery, Hendrick, Holman, Industrial, Jet, Kitcam Inc, Koch, Mid-Oregon, Midwest Automation, Nicoletti, Omga, Pistorius, Whirlwind, Amp International, Beach, Brevetti, Brobo Waldown, Brown & Bigelow, Burke E. Porter, Bouerle, Cadoret, Cantek, Custom Built, CWMI, Diehl, Dropsaw, Duspohl, Ekstrom Carlson, Dimter, Doucet, Galt Industrial, Grecon, Iida, Elu, Essepigi, Galt Canadian, H & A, Heston Anderson, HiPoint, Hitachi, Hypaco, Keip, KNA, Lauderdale-Hamilton, Letarte, Mereen Johnson, Nelson & Atkinson, Nelson Atkinson, Newman Whitney, Norfield, Oliver, Ortegiul, Omac, Optimax, Paul, Peterson, Porter, Precision Automation, Precision Products, Precision, Rockwell, Ruvo, Storti, Samson, Sheng Feng, Stefani, Stone-Tech, taylor, Tiger Stop, Whirlwind, Zubiola, Tiger, Tri-State, Ty-Sa-Man, Unique, Vti, Wadkin, Wadkin-Stemac, Wemco, Wil-Be, Woodma, Yates, Yates-American, Ye Kyoei, A-Tech, Diehl, Elumatec, Fam, General, Grutter, Holytek, Silver, Meadows Mills, Mid Oregon, Newnes, Piche, Powermatic, Vision, Dimter-Cae, Grecon/Luxscan, Grecon-Progressive, Ultimizer,Bell, Boss, Industrial, Barr-Mullin, CTD, Evans, Evans Machinery, Hendrick, Holman, Industrial, Jet, Kitcam Inc, Koch, Mid-Oregon, Midwest Automation, Nicoletti, Omga, Pistorius, Whirlwind, Amp International, Beach, Brevetti, Brobo Waldown, Brown & Bigelow, Burke E. Porter, Bouerle, Cadoret, Cantek, Custom Built, CWMI, Diehl, Dropsaw, Duspohl, Ekstrom Carlson, Dimter, Doucet, Galt Industrial, Grecon, Iida, Elu, Essepigi, Galt Canadian, H & A, Heston Anderson, HiPoint, Hitachi, Hypaco, Keip, KNA, Lauderdale-Hamilton, Letarte, Mereen Johnson, Nelson & Atkinson, Nelson Atkinson, Newman Whitney, Norfield, Oliver, Ortegiul, Omac, Optimax, Paul, Peterson, Porter, Precision Automation, Precision Products, Precision, Rockwell, Ruvo, Storti, Samson, Sheng Feng, Stefani, Stone-Tech, taylor, Tiger Stop, Whirlwind, Zubiola, Tiger, Tri-State, Ty-Sa-Man, Unique, Vti, Wadkin, Wadkin-Stemac, Wemco, Wil-Be, Woodma, Yates, Yates-American, Ye Kyoei, A-Tech, Diehl, Elumatec, Fam, General, Grutter, Holytek, Silver, Meadows Mills, Mid Oregon, Newnes, Piche, Powermatic, Vision, Dimter-Cae, Grecon/Luxscan, Grecon-Progressive, Ultimizer. Automatic Cut Off Saw, Automatic Defect Saw, Automatic Double Cut off Saw, Cut Off Saw, Automatic Double End Trim Saw, CNC Automatic Cut-off Saw, Compound Double End Trim Saw, Computerized Cut-off Saw System, Counter Top Saw, Counter Top Saw with Laser, Crosscut Saw, Cut off Saw, Cut-off Saw (Under Cut), Cut off Saw (undercut) with Tiger Stop, Cut off Saw Line, Cut-off Saw System, Double Cut-off Saw, Double End Corner Notching Saw, Double End Cut-off & Multiple Mortiser, Double End Cut-off Saw, Double End Sliding Trim Saw, Double End Trim & Kerf Saw, Double End Trim & Miter Saw, Double End Trim Saw, Double Revolving Tiling Arbor Saw, Ezy Drawbolt Cutter, Frame &Trim Saw, Hydracut Saw, Hydraulic Cut-off Saw, Infeed Roller Table, Jump Cut off Saw, Left Hand Cut-off Saw, Left Hand Pneumatic Cut-off Saw, LH, Semi-automatic Cut-off Saw, Toe Kick Saw, Chop Saw, Multiple Cut-off Saw, Panel/miter Saw, Pneumatic Swing Saw, Programmable Stop & Push Feed System, Semi-automatic Cutoff Saw, Right Hand Cut -Off Saw, Rip Optimizer, Saw Cut-up Line, Saw, Boring, Dowel Driving Machine, Scrap Saw, Semi-automatic Cut-Off Saw, Solid Surface Wet Saw, Swing Saw, Toe Kick Notch Saw, Toe Notching Saw, Undercut Cut-off Saw, Upright Manual Swing Saw, Waste TrimSaw, chop saw left handed, chop saw right handed, chop saw with infeed and outfeed conveyor, chop saw with manual pop up stops, chop saw with automatic pop up stops, optimizing cut off saw, automatic under cut saw, computerized optimizing chop saw, optical pop up cut-off saw, optical cross cut-off defecting saw, fence with flip stops, optimizing cross cut line saw, single station crayon marking saw line, crayon marking, opti-sizer, general purpose cut-off saw, hydracut saw, double end miter & cut-off saw, undercut chop saw, manual chop saw, hydraulic cut-off saw, double end trim saw, multiple cut-off saw, programmable stop & push feed system, optimizing cut-off line, CNC automatic cut off saw, scan rip cut-off saw system, optimizing rip & cut-off system, color scan & optimizing system, scan & cut-off system.

	Online Catalog - Saws - Cut-Off/Optimizing/Defecting
Site Languages: Credit Cards Accepted:

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

NELSON & ATKINSON [KNA-800] - 14" CUT OFF SAW

Inventory #18158

Capacity 5 HP.
1740 RPM.
14" blade with a 1" bore.
Working height 36".
Max. cut off 2" x 8" or 3" x 4".
Exhaust outlet 4" diameter .
Speed adjustable up to 120 cycles/min.
Pneumatic action initiated by foot pedal...

View Specifications >

		Learn about Machines of Interest to Me >

NELSON & ATKINSON [1200 LH] - CHOP SAW

Inventory #19402

7 1/2 HP motor - L.H.
Foot pedal air...

View Specifications >

		Learn about Machines of Interest to Me >

INDUSTRIAL [0500] - UP CUT SAW

Inventory #19572

Capacity 2-3/16" x 8-1/4" cap.
14" blade cap.
Left-hand unit feeding from right to left.
5 HP motor.
(5 - 90) cycles/min.
Equipped with: magnetic starter with low Voltage control and (2) palm buttons to activate stroke.
Air filter.
Regulator.
Coalescing filter and dust chute.
Includes 14" carbide blade.
16' roller infeed table and 8-1/2' outfeed table with adjustable stops.
Saw recently refurbished and in good...

View Specifications >

		Learn about Machines of Interest to Me >

PISTORIUS [16 UC LH] - UP CUT SAW

Inventory #19697

Capacity jump cutoff saw with 2" x 8" cap.
Left-hand configuration C/W 5 HP motor.
Push button magnetic control.
Combination guard/holddown.
Foot activated cutoff...

View Specifications >

		Learn about Machines of Interest to Me >

ACTIVA [ACS18] - 18" CUT OFF SAW C/W 10' INFEED AND OUTFEED CONVEYOR WITH POP UP STOPS

Inventory #20789

Capacity 18" undercut chop saw, maximum working width 10-330 mm (.5"-13"), max. working height 10-100 mm (.5"-4"), the cutting size will be a combination of the two sizes.
The higher the cut.
The less the width.
The wider the cut the less height can be cut, saw blade diameter 455 mm (18") with 1" bore, 5.5 kW (7.5 HP) main motor.
3600 RPM, air pressure required 0.6 MPA, foot pedal operated, blade guard over saw blade that moves up and down as the saw blade cuts the material, hand safety protection connected to saw blade cover from feeding side using plexiglass cover connected to a limit swith to shut down the machine, complete work area protection guard with viewing window over the entire cutting area, supplied with 3 Meter (10') infeed and 3 Meter (10') outfeed conveyors and 6 pop up stops, available in both left and right handed...

View Specifications >

		Learn about Machines of Interest to Me >

ACTIVA-ST [ACS18T] - 18" CUT-OFF SAW

Inventory #22083

Capacity revolution of saw arbor 3320/3180 RPM (60/50 Hz).
Saw blade 1" x 18" x 3.4 mm x 120 T.
Driving motor 7 1/2 HP.
Table size 690 mm x 660 mm.
Level height of table 840 mm.
Air required 5 kgs/cm2.
Conveyor dimensions 960 x 870 x 1270 mm.
FOB our warehouse Richmond Hill, Ontario.
As we are constantly striving to improve our products we reserve the right to change or modify the specifications without prior notice...

View Specifications >

		Learn about Machines of Interest to Me >

GRECON [3004] - OPTIMIZING CUT-OFF SAW WITH SORTING TABLE PUSH-OUT CONVEYOR

Inventory #23901

Capacity C/W 3 marking stations.
Sorting table.
Push-out conveyor.
Electronic computer controls.
Capable of 1'6" to 11'8" wide.
3.9" thick.
2' long minimum length on the infeed.
Feed speed 140 m/min.
Saw blade diameter 450 mm...

View Specifications >

		Learn about Machines of Interest to Me >

KOSKOVICH [AUTO OMNI] - 5 BLADE OPTIMIZING COMPONENT SAW

Inventory #24761

Capacity (5) blade Auto-Omni Component Saw including arms, lumber in-feed, lumber grippers, motors, inclinometers, waste conveyor with shaker side pands and blades.
Rapid set up time porvides more cutting production per...

View Specifications >

		Learn about Machines of Interest to Me >

PAUL [11 MKL] - CROSSCUT OPTIMIZING SAW

Inventory #24957

Capacity length of boards from 1828 mm to 4880 mm (from 6' to 16').
Width of boards from 47 mm to 150 mm (1.85" x 6").
Thickness of board 19 mm to 50 mm (2").
Sorting box (for 6 sizes).
The fully equipped model 11 MKL feeds the lumber through a measuring station where its full length is measured and scanned.
The board will be optimized according to the data and the cutting list by the MAXI 4.0 control.
The luminescent scanner in the measuring station recognizes the crayon marks on the lumber.
A full optimization of the lumber is only possible on model 11 MKL.
Only if the control knows all the board data the fixed lengths in the cutting list can be combined in such a way that either waste is reduced to a minimum or, certain lengths are cut with priority or, the lumber is optimized according to different qualities or, a value optimization across grade lines is carried out.
Includes WoodEye - measuring, inspecting and optimising timber.
WoodEye is a scanner that inspects and optimises sawn and planed timber - at full production speed.
One system - three basic designs.
The basis of the system, the actual hardware, is WoodEye.
To this is added one of our three application software packages, WoodEye Cross Cut for cross-cut optimization, WoodEye Sorter for grading and sorting WoodEye Parquet and Flooring for parquet and flooring.
WoodEye produces increased profitability...

View Specifications >

		Learn about Machines of Interest to Me >

TIMBER SHARK [1200] - RIGHT OR LEFT HAND CHOP SAW W/TWO HAND CONTROL

Inventory #25235

Capacity working height 36".
Cut off capacity 2" x 12".
7.5 HP.
Magnetic type starter.
3 V-belts drive.
1" arbor for blade and 1-1/4" for bearings.
Air pressure 60 PSI.
Exhaust outlet 4" dia.
Standard speed control.
Adjustable speed up to 100 cycles/min.
18" saw blade capacity (not supplied).
Dust extraction requires 392 CFM.
Fitted with two hand controls.
Options not included 9" x 8' infeed conveyor 575.00, outfeed 575.00, gauge bar with 6 stops 595.00...

View Specifications >

		Learn about Machines of Interest to Me >

RAIMANN [KM 310 2M] - VALU RIP II OPTIMIZING SYSTEM 16' INFEED

Inventory #25288

Capacity cutting width from 1" to 12 1/4".
Throat opening - 25 1/2".
Minimum strip width - 7/8".
Maximum cutting height with pressure board - 2.5".
Maximum cutting height without pressure board - 3".
Minimum material length - 15-3/4".
Arbor motor - 50 HP.
Chain width - 13-1/2".
Diameter of saw arbor - 65 mm.
Saw blade bore - 80 mm.
Standard saw blade diameter - 300 mm (11.8").
Feed speed, infinitely variable to 115 FPM.
Feed motor capacity - 1 HP.
Working height - 33-1/2".
Required dust collection volume - minimum 2500 CFM.
Diameter of dust suction hood - 250 mm (9-13/16").
V-belt drive arbor with (2) movable and (3) fixed blades, shifting blades positioned from operator controls.
As the computer or operator moves blades, laser lights follows.
Fixed saw blade with "Quick Fix" hydro-arbor is mounted on an individual collar that slides up-and-down the arbor into position, then locks into place by tightening end of arbor, no tools and no spacers required.
Features 12" diameter saw blades.
65 mm (2-1/2" diameter ) arbor.
4-1/4" max. depth of cut.
17-3/4" centers between upper holddown rollers (phenolic pressure holddown shoe plate included).
3/4" min. strip width.
19-1/2" min. stock length.
Variable feed speed from 13 - 115 FPM.
Feed drive 2.2 HP motor, chain spikes every 3rd chain link.
Automatic chain lubrication.
(2) sets of top & bottom anti-kickback fingers.
Extended infeed with additional bed roll.
Adjustable infeed fence.
Automatic over thickness shutoff on infeed.
Automatic STAR-DELTA starting.
"Proficut 2" PLC controls.
8" diameter dust hood and resinous wood spray mist device for arbor and blades.
ValuRip System uses Ultra-Sonic technology to measure the width of the board and present the optimized ripping solution to the operator via laser lights.
Valu-Rip III can also position the board, via a servo fence, in front of the rip saw.
Provides you with statistical reports that give you the ability to track incoming and outgoing material.
System built on the flexible ScanCore foundation to allow for future upgrade as well as customizable reporting.
Optimizing Infeed System "Valu-Rip III" consisting of 15' infeed with movable servo fence, high precision ultra-sonic width measurement sensor (single point), industrial PC with ergonomic, user-friendly 12" touch screen, scancore optimizing/tally software, based on clear board width optimizing.
System will automatically position fence and moving blades appropriate to solution.
Valu-Rip "Office Package" software - Valu-Rip software license only.
To be installed on existing computer/network...

View Specifications >

		Learn about Machines of Interest to Me >

DIMTER [OPTI-CUT 304] - 9" OPTIMIZING CUT-OFF SAW

Inventory #26737

Capacity 9" max. & 1" min. board width.
Thickness from 5/8" - 3-1/8" max.
Board length from 18" min. 16' max.
Out feed length can be as short as 5".
Cuts softwood or hardwood.
10 HP Electric motor at 4,100 RPM.
Arbor motor 15-3/4" diameter saw blade.
10 HP Servo drive feed motor with feed speeds up to 750 FPM.
(3) Pneumatically operated tot' rollers and (1) driven bottom drum roller positively feed the board to the saw, Then stop quickly for saw to make precision cut.
16' Infeed manual marking station with a 10" wide belt conveyor.
Marking table is adjusted to suit different board widths.
Measuring station: Cycle type roller conveyor where length of boards are measured by the double wheel measuring system while the tap mounted luminescent camera detects the crayon defect marks, Up to (8) grades.
Transport belt: 10" wide infeed belt between measuring station and saw.
16' Length to process fun length capacity board (can be shortened).
Saw station 1 features: saw stroke cylinder with acceleration-and-deceleration unit for very high cutting speed.
The patented waste gate eliminates short waste & end trims at the saw blade.
Outfeed & sorting: 10" x 37 Long accelerating belt conveyor to (5) sorting stations.
2 HP Feed drive kickers are encoder pulse controlled and sort by any combination of length, Grade and width, Can be programmed to kick singularly or to kick in "two's or three's" for larger heavier boards, End of belt is also programmable as a sorting station for very long fixed lengths.
Salvageable finger joint lengths or long waste pieces.
Separate control cabinet with: industrial PG-type computer (muti-tasking bus system) with 15" computer (muti-tasking Bus system) with 15" VGA monitor. 101-Key -board, Hard disk for data storage & floppy disk drive controls all system functions including measuring, Optimizing, Cutting & sorting, - Software program handles: (16) Board groups, Each with (8) grades and (200) fixed lengths, Production statistics on quantities, Grades & times, Graphical representation of boards.
Simulation of board data; full fault indication and "onboard" diagnostic.
Includes: infeed table...

View Specifications >

		Learn about Machines of Interest to Me >

PAUL [11 MKL] - 19 5/8" DIA. BLADE /OPTIMIZING CUT-OFF SAW

Inventory #27183

Capacity 7" x 1 3/4" max. cross section.
3/8" min. x 3 17/32" max. material height.
Approximately 17 3/4" min. infeed timber length, approx. 16' max. infeed timber length.
7.5 HP saw motor.
19 5/8" saw blade diameter.
3,600 RPM.
Dual marking stations.
Infeed belt conveyor feeding from righ to left at 550 FPM.
Overhead pressure rollers manually adjustable, spiral fluted bottom feed rollers with top pressure roller assembly, pneumatic saw movement.
Includes 20' long outfeed sorter section with (5) kicker stations...

View Specifications >

		Learn about Machines of Interest to Me >

DOUCET [END PRESS 6'] - 6' END PRESS WITH CUT OFF SAW

Inventory #27513

Capacity 6' of layup area between the holddown shoe and pressing cylinder.
Integrated 14" capacity, 3 HP.
6" diameter by 4" stroke pressing cylinder.
2825 lbs of clamping pressure (approx) is exerted using a 100 PSI pneumatic source.
Blanks to be processed flow down to the end of the machine, stop at the pressing cylinder and are kept in alighnment by machine's back fence and alignment fence.
When the layup area is full the pieces are helddown, pressed.
And sawed to length in one cycle as the operator holds the double palm buttons.
Can handle blanks up to 2" x 8" x 36...

View Specifications >

		Learn about Machines of Interest to Me >

NORFIELD [1020] - DOUBLE END TRIM AND MITRE SAW

Inventory #27936

Capacity 1-1/2" - 8' adjusts by hand crank.
3-1/2" max. width.
3/8" to 1-1/2" max. thickness.
Straight 90° cut or 45° cut.
Allows for 0 to 10° undercut using (2) 10" TCT saw blades.
Equipped for automatic operation w/ hopper w/ infeed magazine.
Material feed dog and automatically activated hold down clamp cylinder,,undercut indicator and scale, material center support channel frame and 1-1/2 HP motors.
Saw cuts head casing,,side casing, jamb stock and brick mold.
Saw will mitre casing and brick mold.
Cuts square stops or jamb stock at up to 30 pieces/min...

View Specifications >

		Learn about Machines of Interest to Me >

OGAM [TR-800] - HYDRAULIC CUT OFF SAW

Inventory #27642

Capacity Hydraulic cut off saw.
31" crosscut capacity.
10 HP main motor.
2 HP hydraulic power pak.
Ontario Hydro Approved electrics...

View Specifications >

		Learn about Machines of Interest to Me >

NELSON & ATKINSON [NA-1200] - 12" UPCUT CHOP SAW

Inventory #28260

Capacity 16" blade to cut 12" wide stock.
Pneumatic operated.
Foot pedal control.
Overhead blade guard and stock hold down clamp.
Has Lubrication like spray gun to cut Aluminum.
Motor 7 1/2 HP...

View Specifications >

		Learn about Machines of Interest to Me >

SILVER [SMY-24] - 24" CUT OFF SAW

Inventory #28624

Capacity 2" x 21", 4" x 19", 6" x 15", 8" x 8".
Cycles speed 45 strokes/min.
Max. saw blade size 24".
Saw arbor 1".
Saw blade speed 1850 RPM.
Dust exhaust outlet 4" diameter.
Motor 10 HP.
C/W saw blade.
Left to right feed with 2 meter infeed and outfeed roller tables w/gauge...

View Specifications >

		Learn about Machines of Interest to Me >

SILVER [SYFC-24] - 24" CUT OFF SAW

Inventory #23428

Capacity 2" x 21", 4" x 19", 6" x 15", 8" x 8".
Cycles speed 45 strokes/min.
Max. saw blade size 24".
Saw arbor 1".
Saw blade speed 2500 RPM.
Dust exhaust outlet 4" diameter.
Motor 10 HP.
C/W saw blade.
Left hand model.
Optional Extra infeed and outfeed roller conveyor...

View Specifications >

		Learn about Machines of Interest to Me >

DIMTER [OPTICUT 304] - 8" OPTIMIZING CUT-OFF SAW

Inventory #28717

Capacity 10 HP 4,100 RPM motor.
15-3/4" diameter saw blade.
10 HP feed motor, 750 FPM.
Width 7-1/4" max. board capacity, 3/4" min. board capacity.
Board length from 14" min. to 16' max.
Board thickness 1/4" to 3".
Feeds right to left.
3 pneumatically operated top rollers, 1 driven bottom drum roller for a precision cut.
Infeed rolls through to the 8 bay of kickers table.
Three marking stations.
Lugged Infeed deck.
Includes all support structure, catwalk, operator access area.
Industrial standard PC with 4 onboard computers...

View Specifications >

		Learn about Machines of Interest to Me >

INDUSTRIAL [14"] - 14" UPCUT SAW SINGLE PHASE

Inventory #28737

Capacity 14" carbide blade.
5 HP.
The electric motor runs the saw blade and pneumatics operate the blade guard (which protects the blade and clamps the wood before the blade cuts the piece), The pneumatics also operates the blade raising action.
Right Hand Model...

View Specifications >

		Learn about Machines of Interest to Me >

PISTORIUS [UC-L16] - FULL AUTO TIGERSTOP AND PISTORIUS UPCUT SAW

Inventory #28861

SOLD

Capacity 7.5 HP Motor, 3500 RPM.
Full automatic Tigerstop pusher/fence and Pistorius up-cut saw.
Tigerstop belt replaced in 2010, Control board in 2011.
New bearings on saw in 2010.
Currently under power.
Includes Tigerstop, Saw.
Tigerstop steel in-feed and out-feed tables, AIK interlock kit, And updated safety guard not in picture.
10' Fence.
12' In-feed table.
10' Out-feed table...

View Specifications >

		Learn about Machines of Interest to Me >

WHIRLWIND [1000R] - 14" PNEUMATIC UPCUT SAW

Inventory #28877

Capacity 5 HP, 14".
There are 2 (14") FS tool 180 tooth blades, That have only been sharpened once each.
1,000 Hours use.
Blade 3450...

View Specifications >

		Learn about Machines of Interest to Me >

CAMERON [37A-M2] - OPTIMIZING CUT-OFF SAW SYSTEM

Inventory #29061

Capacity 2" x 8" wide and 16' long w/ 14" diameter blade.
7.5 HP motor.
"Quick Chop" will automatically cut for highest yield, value, or grade.
Uses crayon marking for defects.
Cut list, spreadsheets,,can be downloaded from cabinet design software.
System includes frame, computer, luminescence sensor, servo motor, "Crosscut Solutions" operating software plus pneumatic holddown cylinders for bowed stock and 4" diameter dust outlet...

View Specifications >

		Learn about Machines of Interest to Me >

BARR-MULLIN [THE BRUTE BWS12] - 10 HP OPTIMIZING SAW

Inventory #29239

Capacity material thickness 2".
Material width 13".
Feed rate variable to 1000 FPM.
Feed height 42".
Arbor motor 10 HP.
Saw speed 3530 RPM.
Saw stroke time as little as 0.2 seconds.
Saw blade 22", 1" bore.
Includes two powered marking station that can go on the infeed.
Total infeed 20'.
33' Outfeed conveyor has (6) pneumatic kickers that the computer can track to actuate the kicker to knock off each size piece into a gravity fed slide, down into a hopper.
Slides are not currently installed but are with the machine.
All can be powered and demonstrated.
Included software NT (can be remotely programmed and controlled).
Extra Back-up computer with software and includes width management control...

View Specifications >

		Learn about Machines of Interest to Me >

PAUL [MKL 11] - OPTIMIZING CUT OFF SAW

Inventory #29240

Capacity timber length 500 to 5000 mm, width 30 to 180 mm, thickness 15 to 75 mm.
Incline belt conveyor 9500 mm long x 100 mm belt width.
Scanner and photocell for locating front and rear of timber.
Upper marking and lower marking stations.
Steel frame mounted at 30°s angle.
Feed speed 200 mpm (660 FPM) driven by 4 kW motor.
Programmable pneumatic cutting.
Stroke adjustable from 0.03 to 2 seconds.
Automatic waste separater with air jet blower and sound enclosure.
5.5 kW (7.5 HP) saw motor.
Outfeed belt conveyor 11.5 m long x 200 mm belt width driven by 0.75 kW motor.
Fixed fence 3 m long.
3 m long guide bar.
Sorting station with 6 pneumatic ejectors with 230 mm stroke with 8 m long fix bar and 6 m, sliding bar and 2 m long sliding bar.
MAXI 4.0 MV CNC control.
IBM PC.
Special holddown device for cutting lengths shorter than 230 mm.
Feed right to left...

View Specifications >

		Learn about Machines of Interest to Me >

WHIRLWIND [1000R] - 14" PNEUMATIC UPCUT SAW

Inventory #29523

Capacity 5 HP.
14" blade.
Right hand feeding.
Magnetic starter...

View Specifications >

		Learn about Machines of Interest to Me >

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

* Price may vary with exchange rate.

Online Catalog - Saws - Cut-Off/Optimizing/Defecting