MLS MACHINERY New and Used Woodworking Lathes - Copy / Automatic / Misc. - Andreoni, Bacci, Centauro, Delta, Diehl, Goodspeed, Hapfo, Jet, La Nuova Scolpitrice, Locatelli, Porter, Powermatic, Richardson, Vega, Zuckermann, Blount, Bulleri, Calpe, Chung-Hsin, Coe, Cosma, Custom Built, Diehl Bradley, Duro, Ekstrom/Carlson, Elio Valeri, Fagus, Fell, Franklin, Geiger, General, Genini, Harrison Graduate, Hegner, Hempel, Holytek, Imperial, Imta-Mvm, Intorex, Killinger, Livio Macchia, Macchia, Mariani, Mattison, MPE, MVM, Oliver, Oma, Palpator, Pellegrino, Prybill, Reichenbacher, Renzo Borgonovo, Rigimax, Sagittario, Samco, Schaerer, SCM, SCMI, SCMI (Mini Max), Terrco, Toni Ferranti, Toolex, Torreda-Tormadex, Tormadex, URPE, Valeri, Wadkin, Yates-American, Brusa, Centauro, Lobo, Rigimax, Silver, Vega, Wema, Zimmermann,Andreoni, Bacci, Centauro, Delta, Diehl, Goodspeed, Hapfo, Jet, La Nuova Scolpitrice, Locatelli, Porter, Powermatic, Richardson, Vega, Zuckermann, Blount, Bulleri, Calpe, Chung-Hsin, Coe, Cosma, Custom Built, Diehl Bradley, Duro, Ekstrom/Carlson, Elio Valeri, Fagus, Fell, Franklin, Geiger, General, Genini, Harrison Graduate, Hegner, Hempel, Holytek, Imperial, Imta-Mvm, Intorex, Killinger, Livio Macchia, Macchia, Mariani, Mattison, MPE, MVM, Oliver, Oma, Palpator, Pellegrino, Prybill, Reichenbacher, Renzo Borgonovo, Rigimax, Sagittario, Samco, Schaerer, SCM, SCMI, SCMI (Mini Max), Terrco, Toni Ferranti, Toolex, Torreda-Tormadex, Tormadex, URPE, Valeri, Wadkin, Yates-American, Brusa, Centauro, Lobo, Rigimax, Silver, Vega, Wema, Zimmermann. Automatic Copy Lathe, Automatic Copy Lathe W/sanding, Automatic Fluting Machine, Automatic Hopper Fed Variety Lathe, Automatic Hydraulic Copy Lathe, Automatic Hydraulic Back Knife Lathe, Automatic Tracing Lathe, Automatic Turning & Sanding Lathe, Automatic Turning Lathe, Automatic Turning Sander, Automatic Variety Lathe, Copy Lathe, Copy Lathe (semi-automatic), Copy Lathe with Fluting & Roping, Double Trim & Chuck W/hopper, Gap Bed Lathe, Hand Fed Tool Carriage Lathe, Hopper Fed Copy Lathe, Automatic Back Knife Lathe, Hydraulic Copy Lathe, Hydraulic Copy Lathe with Twist Attachment, Hydraulic Face Turning Lathe, Manual Lathe, Multi Spindle Copy Lathe, NC Controlled Hydraulic Copy Lathe, Novelty Lathe, Pattern Makers Lathe, Pattern Makers Turning Lathe, Profile Stave Copying Machine W/separate Sander, Roping & Fluting Machine, Roping Machine, Semi-automatic Back Knife Lathe, Semi-automatic Copy Lathe, Semi-automatic Turning Lathe, Set-up Stand, Sliding Bed Gap Lathe, Spiral Rod Lathe, Tracing Copy Lathe, Turning & Sanding Lathe, Turning Lathe, Variety Lathe (automatic), Wood Turning Lathe, electronic lathe, multi spindle lathe, multiple spindle lathe, automatic hopper fed lathe, vertical copying lathe, horizontal copying lathe, variety lathe with drill attachment, wood copying lathe, air-hydraulic back knife lathe, C.N.C. lathe, C.N.C. lathe with sanding, knob turning lathe button turning lathe, bowl making lathe, pattern makers lathe, multi spindle copy lathe, novelty lathe, pro lathe duplicator, wood turning lathe, automatic variety lathe, manual lathe, automatic lathe, automatic hydraulic copy lathe and spindle sander, automatic turning sander, automatic copy lathe with sanding.

	Online Catalog - Lathes - Automatic/Copy/Misc.
Site Languages: Credit Cards Accepted:

FEATURED PRODUCTS

LA SCOLPITRICE [ST-4] - 4- SPINDLE COPY LATHE...

REICHENBACHER [E620] - 6 SPINDLE COPY LATHE...

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

LA SCOLPITRICE [ST-4] - 4- SPINDLE COPY LATHE

Inventory #15681

Capacity lathe equipped with (4) spindles to produce (4) parts at a time.
(2) automatic working cycles.
Max. distance between centers: 49.25".
11" between centers.
Cutter speed 4950 RPM.
Ideal for shaping and carving irregular shaped pieces such as "Queen Ann" legs...

View Specifications >

		Learn about Machines of Interest to Me >

TORREDA [PA-1200-E] - HYDRAULIC TRACING LATHE

Inventory #18699

Capacity 2 hydraulic tracing knives.
10" x 49" max. turning.
6 speeds.
Steady rest with various size bushings.
Hydraulic tail stock.
2 top mounted hydraulic tool holders.
5 HP spindle with electronic breaking.
4 speeds - 1200,2800,3500,4550.
2 HP hydraulic pump.
Safety guard.
Tooling supplied several roughing and finishing knives.
Max. turning diameter 14" at present can be increased to 18" for an additional 500.00...

View Specifications >

		Learn about Machines of Interest to Me >

MATTISON [69] - 42" AUTOMATIC LATHE

Inventory #21635

Capacity arbor length 42" x 2-5/8" diameter.
Main motor 15 HP.
Spindle drive motor 1.5 HP.
Hopper feed...

View Specifications >

		Learn about Machines of Interest to Me >

DIEHL [TL-42] - AUTOMATIC TURNING LATHE

Inventory #23554

Capacity arbor size 44" X 2-5/8" diameter.
Stock capacity 4" X 4" X 44".
Main motor 20 HP.
Spindle drive motor 1 HP.
Turning speed infinitely variable from 3 to 30 RPM.
Hydraulic power unit 2 HP.
Hopper feed.

View Specifications >

		Learn about Machines of Interest to Me >

CENTAURO [T3 1600] - COPY LATHE

Inventory #23563

Capacity Centauro Semi-Automatic Hydraulic Copy Lathe.
63" max. between centers.
5.5 HP main motor.
900-1500-1800-2250-3000-4500 RPM spindle speeds.
1 HP hyd. var. speed carriage 0-19 FPM.
Carriage return speed 24 FPM w/ (1) copying unit & revolving steady rest for max.
65 x 65 mm square w/reducing bushing & pre-cutting insert knife.
3-1/2" max. part diameter w/revolving steady rest.
5-7/8" max. w/copying unit.
19-5/8" max. for manual turning.
Max. height of center 8.89".
Mandrel brake.
Includes.
"AG 125" sharpening machine w/Taunting gouge.
Drawing tool support w/knife 20 x 20 x 100 mm.
Drive center w/interchangeable jaws 26 & 45 mm dia.
Revolving tailstock center 2/12 mm diameter tip.
(2) vertical mechanical saddles complete w/tools for dowel pins,back knives for vertical slides.
Setup tools.
Sharpening stones & instruction manuals...

View Specifications >

		Learn about Machines of Interest to Me >

MATTISON [69] - CNC CONTROLLED AUTOMATIC LATHE

Inventory #23598

Capacity 54".
2 5/8" Diameter Arbor.
Motor 25 HP.
Matti-Max Computerized CNC Control Panel.
Two Pneumatic Steady Rests.
Shaving hood.
Hopper Feed.

View Specifications >

		Learn about Machines of Interest to Me >

LOCATELLI [MINIARIETE] - AUTOMATIC HYDRAULIC COPY LATHE

Inventory #23612

Capacity 4 hydro-pneumatic form tool holders with rapid advance.
For production of small wood items made from round or square stock.
Automatic hopper feeds squares or rounds through hollow chuck.
Special feed clamp to keep cut-off waste minimized.
Capacity over 1800 parts/hr.
Spindle barrel hole 47 mm, max. round is 44 mm, max. square spline is 30x30 mm, max. length of splines 600 mm.
Workpiece max. length 100 mm, max. travel 120 mm.
Spindle motor 4 HP, pump motor 2 HP.
Each unique wooden item manufactured on this machine will require it's own unique tooling/cutters,,(1)roughing tool, (1) finishing tool, (1)independent tool for sizing, (1) parting tool.
Tooling/cutters and spare parts are readily available.
This machine does not come with any tooling...

View Specifications >

		Learn about Machines of Interest to Me >

ACTIVA [ACL4] - 4 SPINDLE COPY LATHE WITH SANDING

Inventory #23829

Capacity 2 shaping spindles 7.5 HP, 7200 RPM.
Sanding heads 4 HP, 3600 RPM.
Feed motor 2 HP.
Shaper cutter 34 mm diameter.
Minimum working length 165 mm.
Maximum working length 900 mm.
Minimum working 30 mm diameter.
Maximum working 170 mm diameter.
Feed speed 3.6 IPM.
Counter pressure cylinder for smooth feeding.
Auto copy shaping from template.
Foot pedal controlled.
Adjustable copy pressure.
Individual clamping of each leg...

View Specifications >

		Learn about Machines of Interest to Me >

MATTISON [86-Z] - 48" SPINDLE C.N.C. LATHE

Inventory #24075

Capacity 48" spindle with convention backknives.
Hopper feed with lower belt port outfeed to incline belt.
25 HP motor (230V).
Touch screen control.
12" dust collection...

View Specifications >

		Learn about Machines of Interest to Me >

MATTISON [66] - ROTARY WOOD LATHE

Inventory #24074

Capacity 15 HP.
30" long spindle.
Hopper feed with bottom discharge.
10" dust port.
16.5 total...

View Specifications >

		Learn about Machines of Interest to Me >

SEAVEY [M-6HD] - BACK KNIFE LATHE

Inventory #24078

Capacity maximum between centers approximately 24".
3" square or round, head spindle drive 15 HP.
Hydraulics low pressure.
Self-contained system with 2 HP motor.
Turning rate is up to 500 pieces/hr.
Hopper feed.
Push button controls.
Description per...

View Specifications >

		Learn about Machines of Interest to Me >

REICHENBACHER [E620] - 6 SPINDLE COPY LATHE

Inventory #24169

Capacity Lathe equipped with (6) spindles to produce (6) parts at a time.
With center master pattern station.
Max. distance between centers 42".
Max. width 8".
Cutter speed to 6000 RPM with frequency converter.
Each cutting spindle 5 HP.
Direct drive with 4 cup cutters.
Variable feed speed 200 mm - 1200 mm, Cutting rate is variable for rough or fine cutting.
Pneumatic clamping and stock positioning is a pneumatic retracting bed.
Will do any asymmetrical shape such as chair backs, Queen Anne legs, Handles, Spokes, Shoes, Decorative carving blanks.
Currently in operation with dust collector.
Can supply transformer...

View Specifications >

		Learn about Machines of Interest to Me >

CUSTOM - SEMI-AUTOMATIC LATHE AND SANDER LINE

Inventory #24395

Capacity to 9" X 60" maximum.
Auto lathe with hydraulic copier and rotary blades.
Spring loaded heads.
PLC controls.
Spindle guillotine with blades.
Nash 87 sander 40" capacity.
24k of blades and heads included...

View Specifications >

		Learn about Machines of Interest to Me >

GOODSPEED [FH-40] - BACK KNIFE LATHE

Inventory #26667

Capacity Hydraulic unit 2 HP self contained.
Stock length 3" to 41.5".
Stock size 1" thru 3" square or round.
Head spindle drive motor 15 HP.
Spindle speeds 2250, 3200.
3825, 4625.
Turning rate up to 600 pieces/hr.
Hopper fed...

View Specifications >

		Learn about Machines of Interest to Me >

DIEHL [430] - 30" AUTOMATIC LATHE WITH HOPPER FEED

Inventory #27094

Capacity 4" x 4".
30" turning length.
Hopper feed.
15 HP main motor.
2 HP hydraulic pump motor for cutter head feed.
2-5/8" diameter arbor rotating at 2,700 RPM.
3 - 30 RPM variable part turning speed with 1/2 HP motor.
(2) dust outlets...

View Specifications >

		Learn about Machines of Interest to Me >

LMACCHIA [012/FE] - SPIRAL ROPING MACHINE WITH AUTOMATIC INDEX PLATE

Inventory #27510

Capacity max. working length 67".
Max. working Diameter 7.87".
Spindle speed 10,000 and 14,000 RPM.
Cutter motor 3 HP.
Feed motor 0.5 HP,pitch 18 mm to 318 mm.
Indexing programs (automatic) savable up to 99.
100 Hours.
Around 2000 or 2001...

View Specifications >

		Learn about Machines of Interest to Me >

SYMTEC - COPY LATHE

Inventory #27677

Capacity turn 12" diameter, 36" long.
Copies from another turning or a template.
3 speeds.
1 HP motor.
The tracer will follow the original and the cutter will cut the blank.
Has a built in sharpener with no need to stop the machine.
The tool holder is held on the table with both hands and you just follow the tracer on the template.
After a short time you will be cutting a 30" spindle in under 3 minutes...

View Specifications >

		Learn about Machines of Interest to Me >

MINI MAX [T-124] - 43" COPY LATHE

Inventory #27893

Capacity max. working length 47".
Max. working length with copier 43".
1.8 HP motor with 4 spindle speeds, 680 RPM, 1200 RPM, 2200 RPM, 300 RPM.
Max. working diameter w/copier 7".
5-1/8" Faceplate.
10" Toolrest.
Copier device good for balusters, turned legs.
And other repetitive turnings...

View Specifications >

		Learn about Machines of Interest to Me >

ATRUMP [KL1640NC] - 38" METAL LATHE

Inventory #28652

Capacity swing over bed 16".
Swing over cross slide 9".
Height of center 8".
Distance between centers 38".
Z axis travel 31.5".
X axis travel 7.4".
Width of bed 10.25".
Spindle motor 75 HP inverter.
Spindle speed max. 2500 RPM programable.
Torque 3 speed gear box.
Mac chuck size 10".
Max. tool size 3/4".
Laser compensation mapping.
High precision class C5 ballscrews.
Auto central lubrication system.
Programmable coolant.
Sealed quartz work light.
Programming conventional, G codes.
CAD,CAM ready.
15" color LCD screen.
Digital servo motor with auto tuning.
USB 2.0 and Ethernet Lan for file transfer...

View Specifications >

		Learn about Machines of Interest to Me >

MATTISON [69] - AUTOMATIC TURNING LATHE

Inventory #28912

Arbor capacity 54", 2 5/8" diameter.
Main motor 25 HP.
230/460 3ph.
Center drive 1.5 HP.
Two speed motor with step pulley.
Double end drive.
Shaving hood.
Clean check and tested...

View Specifications >

		Learn about Machines of Interest to Me >

SCMI [T-124] - 43" COPY LATHE

Inventory #29001

Capacity 47" max. working length.
1 HP, 680-300 RPM.
Chisel set for turning.
43" max. width with copier.
16" Swing over bed.
Includes a small box of various pieces and parts.
No Tool rest.
Not included are the mist knives and tools that come with it...

View Specifications >

		Learn about Machines of Interest to Me >

MINI MAX [T-124] - 47" COPY LATHE

Inventory #29140

Capacity 47"W x 17"H.
1 HP.
4 Feed speeds, 500, 900, 1600, 2500.
17" Turning capacity.
Duplication copier.
A very nice copy lathe that has seen little use.
Chain driven.
Manual.
Feed copy device by use of hand wheel...

View Specifications >

		Learn about Machines of Interest to Me >

SEAVEY [M-7A] - BACK KNIFE LATHE

Inventory #29570

Capacity maximum between centers approximately 46".
Center perfectly square or round, head spindle drive 15 HP.
Hydraulics low pressure.
Self-contained system with 2 HP motor.
Turning rate is up to 500 pieces/hr.
Turn without a drive stub.
Push button controls.
For long slender turnings.
Description per...

View Specifications >

		Learn about Machines of Interest to Me >

Page 1 of 1

<< First Page | < Prev. Page | Next Page > | Last Page >>

* Price may vary with exchange rate.

Online Catalog - Lathes - Automatic/Copy/Misc.